Home » Polyamide

Our product range

ACRAFIX EP 6047

ACRAFIX EP 6047

Highly effective carbodiimide crosslinker to improve alcohol- and solvent resistance of polyurethane coatings. Improvement of general durability properties

 

Learn more >
ACRAFIX PCI

ACRAFIX PCI

Easy to handle crosslinker for coatings of the EDOLAN® range based on an aliphatic polyurethane with blocked NCO groups. Very good potlife and paste stability in coating formulations. Needs temperature of approx. 130°C to activate. Non yellowing.

 

Learn more >
Placeholder

ACRAMIN PREFIX K

ACRAMIN Prefix K is a pretreatment agent for use in the production of fashionable pigment-dyed wash-out articles (garment dyeing).

Short dyeing times
High bath exhaustion (up to 98%) so little pollution of waste water
High colour yield
Better reproducibility
Far less soiling of dyeing units

Learn more >
BAYGARD BCS

BAYGARD BCS

The no. 1 cost-effective water and oil repellent with great performance.

BAYGARD® BCS is used in typical pad-finishing applications, as pre-treatment before coating and as top-finish.

Key benefits are:

  • High wash druability
  • High performance C6-based fluorocarbon
  • Optimises process efficiency
  • Great handling
  • Learn more >
    BAYGARD CLEAN

    BAYGARD CLEAN

    A durable, C6 based oil- and water-repellent fluorocarbon resin with excellent results on polyester and very good results on cotton and polyamide. Maintains soft hand. It also imparts excellent stain removability.

     

    Learn more >
    Placeholder

    BAYGARD EDW

    A very effective polyurethane dispersion with functional groups to improve the properties and permanency of fluorocarbon finishes on all types of substrates.

     

    Learn more >
    BAYGARD EFN

    BAYGARD EFN

    High concentrated, very effective, nonionic, C6 based repellent agent with good oil- and optimum water repellency. Excellent suitable for coated outdoor application. Due to its nonionic character especially to be used as a pretreatment before coating and to be combined with other chemistry or to be added in coating recipes.

     

    Learn more >
    BAYGARD EP 3001

    BAYGARD EP 3001

    Antisoiling, water and oil-repellent agent for textile floor coverings and other pile fabrics.

    • Pronounced oil and water repellency

    • Easy stain removal

    • Good dry soil repellency

     

    Learn more >
    Placeholder

    BAYGARD EP 3017

    High performance, C6 based water- and oil repellent agent for outdoor applications, e.g. awnings, based on polyester or acrylics. Excellent Bundesmann values and outstanding Schopper test values are achievable.

     

    Learn more >
    BAYGARD FBI

    BAYGARD FBI

    Aliphatic, nonionic booster for the use with fluorocarbons. Optimizes the resistance of water- and oil-repellent finishes to washing and dry-cleaning.

     

    Learn more >
    Placeholder

    BAYGARD TT 6

    C-6 based fluorocarbon resin with excellent oil and water repellency and enhanced environmental performance. Excellent results on PES and technical fabrics. High abrasion resistance (especially on PAC). Little effect on FR properties of fabric.

     

    Learn more >
    Placeholder

    BAYGARD WRS

    Fluorine free water-repellent agent for synthetic fibers and blends with cellulosic

    Imparts excellent water repellent effects
    Applies soft touch and smoothness
    Very good durability, especially in combination with boosters

    Learn more >
    BAYPRET NANO-PU

    BAYPRET NANO-PU

    BAYPRET® NANO-PU is a special self-crosslinking polyether polyurethane, which is dispersed to a droplet size of less then 100 nm. This makes the BAYPRET® NANO-PU a true nano-dispersion. This gives unique application possibilities like special handle modifications, anti-pilling treatments and resin treatment. Furthermore, its unique properties allow the useage of BAYPRET® NANO-PU to upgrade a resin finishing.

    High durability and wash-resistance
    Lower strength-loss
    Softer and more durable handle
    Wrinkle free upgrade to more than 20 washes
    Much better abrasion resistance

    Learn more >
    Placeholder

    BAYPRET USV

    BAYPRET® USV is a self-crosslinking polyether polyurethane polymer which forms a permanent highly elastic film around the fibres. This film is formaldehyde-free. Unlike synthetic resins, BAYPRET® USV does noet need a catalyst because it is self-crosslinking. If it is used in combination with synthetic resins these should be crosslinked with weak catalysts such as magnesium chloride or aminohydrochloride. BAYPRET® USV may react to strong catalysts such as zinc nitrate or zinc chloride.

    Low formaldehyde
    Basic handle is soft and high-bulk
    Improves abrasion resistance and rubfastness
    Reduces pilling
    Fibre-bonding agent

    Learn more >
    BAYPROTECT AM

    BAYPROTECT AM

    Permethrin based insect protection agent for outwear, sportswear, military applications on clothing and tents, curtains. The insect proof agent can be applied on all type of fabrics. Permethrin prevents insect bites through the fabric and kills insects that contact the fabric. Highly effective against: o Aedes aegypti (Yellow fever mosquito)
    o Anopheles maculatus (Malaria mosquito)
    o Anopheles gambiae (Malaria mosquito)
    o Anopheles albopictus (Asian tiger mosquito)
    o Culex quinquefasciatus (House mosquito)
    o Ixodes ricinus (Ticks)
    o Talitridae (Sand fly)
    o Cimex lectularius (Bed Bug)
    o Dermatophagoides pteronyssinus (House dust mite)

    High fastness to washing and wear abrasion
    Can be eliminated in waste water treatment plants

    Not harmful for mammals
    Odorless, non-irritating

    Learn more >
    BAYPROTECT CL

    BAYPROTECT CL

    Efficient stain repellent against oxidative agents

    • Suitable against hypochlorite solutions (cleaning agents and bleaches)
    • Efficient against benzoyl peroxide (acne cream)
    • Suitable for application in dye bath or print paste
    Learn more >

    Showing 1–16 of 121 results

    LATEST FROM OUR BLOG

    Let’s get used to life in the fast lane

    After more than 25 years in Asia, Simon Collinson is returning to Europe, responsible for Sales and Marketing in Europe & Americas region at TANATEX. He describes the thrill of working in fast-growing markets and why he wants to bring the dynamism of Asian business culture with him. Simon qualified as a chartered colourist in […]

    Innovation powers success in Japan – so let’s have more!

    Delighted with TANATEX blockbuster TASTEX®, Yasuhiro Matsuura, Representative Director of TANATEX Japan, is keen to see the next pioneering breakthrough. Product innovation is a key ingredient in the success of TANATEX in Japan, according to Representative Director, Yasuhiro Matsuura. That’s why his favourite product range is the TASTEX® Durable Cosmetic Finishes for textiles. These provide […]

    Printing functional finishes

    Madelaine Cornforth talks to Thomas Ruchser, Global Manager of Digital Printing and Carpet Solutions about the company’s developments in functional inks and finishing. Today there are textile finishes for almost every challenge thinkable. Hydrophobic, anti-microbial and flame-retardant finishes are among some of the most popular for the apparel, home textiles and soft signage industries. For […]

    Contact Us

    We're not around right now. But you can send us an email and we'll get back to you, asap.

    Start typing and press Enter to search