Our product range

Placeholder

Curite 5184N

Catalyst for resin finishing of cellulosics and cellulosic/synthetic blends.

Suitable for easy-care and crease-resist finishes. Suitable for fully-fashioned articles. Allows rapid crosslinking. Suitable for the pre-cure and post-cure processes.

Learn more >
TANAPUR RUB

TANAPUR RUB

Easy to handle crosslinker for coatings of the EDOLAN® range based on an aliphatic polyurethane with blocked NCO groups. Very good potlife and paste stability in coating formulations. Needs temperature of approx. 130°C to activate. Non yellowing.

 

Learn more >
Placeholder

ACRAMIN PREFIX K

ACRAMIN Prefix K is a pretreatment agent for use in the production of fashionable pigment-dyed wash-out articles (garment dyeing).

Short dyeing times
High bath exhaustion (up to 98%) so little pollution of waste water
High colour yield
Better reproducibility
Far less soiling of dyeing units

Learn more >
Aegis® AEM 5772

Aegis® AEM 5772

AEGIS® is based on an antimicrobial technology that’s been proven to be a safe and effective way to eliminate odour-causing bacteria for more than 30 years.

  • The active ingredient in AEGIS® forms a colourless, odourless, positively charged polymer that molecularly bonds to the treated surface.
  • Can be pad applied during the normal manufacturing process.
  • Cationic action eliminates microbes that cause odour, stains and deterioration.
  • Applications include polyester, polyester-blends, fleece, insulation, fiberfill, foam, leather and synthetic leather.
  • Readily breaks down in the environment to basic, naturally occurring materials like water, silicon dioxide (sand) and carbon dioxide.
Learn more >
Aegis® AEM 5772-5

Aegis® AEM 5772-5

AEGIS® is based on an antimicrobial technology that’s been proven to be a safe and effective way to eliminate odour-causing bacteria for more than 30 years.

  • The active ingredient in AEGIS® forms a colourless, odourless, positively charged polymer that molecularly bonds to the treated surface.
  • Can be pad applied during the normal manufacturing process.
  • Cationic action eliminates microbes that cause odour, stains and deterioration.
  • Applications include polyester, polyester-blends, fleece, insulation, fiberfill, foam, leather and synthetic leather.
  • Readily breaks down in the environment to basic, naturally occurring materials like water, silicon dioxide (sand) and carbon dioxide.
Learn more >
Placeholder

ASTRAGAL ACD 01

Migration agent for the acrylic fibres with cationic dyes

Enhances the migration of cationic dyes
Does not block the dye uptake when dyeing acrylics or cationic dyeable polyester
Positive impact on the reproducibility of the dyeings
Levelling of faulty dyeings
———–

Learn more >
Placeholder

ASTRAGAL PAN 01

Retarder for dyeing acrylic fibres and blends

Can be also used für PAN /WO and PAN/CO blends
Retarding the dyes during critical temperature range
Permanent effect
High affinity to acrylic fibres
Regulating the strike rate of ther cationic dyes

Learn more >
Placeholder

AVOLAN IS**

Dispersing agent for the dyeing of polyester fibres

Available in powder form as well as as liquid
Dyeing for Polyester/Wool blends with disperse and acid dyes
Dispersing agent for dyeing vat dyes
Dyeing of 2 1/2 Acetate and Triacetate fibres
Low foaming

Learn more >
BAYGARD AS 01

BAYGARD AS 01

Dry soil repellent finishing agent.

  • Suitable for all types of fibres and fibre blends
  • Suitable for spray, foam, padding, slop-padding and exhaust application
  • Does not impair pile stability
Learn more >
BAYGARD EP 3001

BAYGARD EP 3001

Antisoiling, water and oil-repellent agent for textile floor coverings and other pile fabrics.

  • Pronounced oil and water repellency

  • Easy stain removal

  • Good dry soil repellency

 

Learn more >
Placeholder

BAYGARD WRS

Fluorine free water-repellent agent for synthetic fibers and blends with cellulosic

Imparts excellent water repellent effects
Applies soft touch and smoothness
Very good durability, especially in combination with boosters

Learn more >
BAYPROTECT CL

BAYPROTECT CL

Efficient stain repellent against oxidative agents

  • Suitable against hypochlorite solutions (cleaning agents and bleaches)
  • Efficient against benzoyl peroxide (acne cream)
  • Suitable for application in dye bath or print paste
Learn more >
BAYPROTECT DSR 01

BAYPROTECT DSR 01

A fine-dispersed finishing agent to prevent dry soil from binding onto fibres, yielding clean fabrics

  • Prevents dry soil from binding to the fibres
  • Basically resistant to washing, dry-cleaning and mechanical abrasion
  • Applicable on apparel fabrics, upholstery, carpets and other household textiles
Learn more >
Placeholder

PROTOREZ FFO 01

Odourless non-formaldehyde resin for the easy-care and wrinkle free finish of cellulosics and their blends with synthetic fibres.

Contains no formaldehyde and does not release any formaldehyde. Gives good fabric performance, without causing the strenght losses as formaldehyde resins. Gives good, supple handle to fabrics. Can be used in pre-cure, post-cure and garment finishing. When used on Tencel, this keeps its peachskin character. Meets the EU-Ecolabel requirements.

Learn more >

Showing 1–16 of 126 results

LATEST FROM OUR BLOG

Consumers are waking up to the importance of sleep

In 2013 the US Government launched its National Healthy Sleep Awareness Project. This was prompted by a growing body of evidence that lack of sleep was costing its economy billions of dollars every year. $411 billion to be precise, according to the RAND Corporation who estimate that figure would be halved if those people sleeping […]

Enhancing the performance of digital inkjet printing on your swimwear

Inkjet printing has been transformational for the swimwear industry. It’s allowed an expansion of collections and a fleetness of foot of which designers and marketers could once only dream. It means fashion houses can keep on trend at higher speed and lower cost, meeting changing demand more precisely. It’s allowed designers to run riot with […]

An expert perspective on creating a bright future for the dyeing industry

With over forty years’ experience in the dyeing business, Harald Gruenewald has built up a level of experience and expertise that is second to none. We interviewed the Business Development Manager of Classical Textiles at Tanatex, to delve into the insights he can share about driving time, cost and environmental efficiencies in this highly competitive […]