Our product range

ACRAFIX FF

ACRAFIX FF

Very effective and eco friendly crosslinker for a wide variety of applications. Based on blocked aliphatic polyisocyanate. Formaldehyde free, organotin free and free from co-solvents and any other restricted substance.

 

Learn more >
Placeholder

ACRAFIX ML

Aqueous preparation of a modified melamine resin for coatings and prints. Good stability in coating- and printing pastes, especially at elevated temperatures.

 

Learn more >
Placeholder

ACRAFIX ML 200%

Very high concentrated and effective aqueous preparation of a modified melamine resin for coatings and prints. Good stability in coating- and printing pastes, especially at elevated temperatures.

 

Learn more >
Placeholder

Curite 5184N

Catalyst for resin finishing of cellulosics and cellulosic/synthetic blends.

Suitable for easy-care and crease-resist finishes. Suitable for fully-fashioned articles. Allows rapid crosslinking. Suitable for the pre-cure and post-cure processes.

Learn more >
TANAPUR RUB

TANAPUR RUB

Easy to handle crosslinker for coatings of the EDOLAN® range based on an aliphatic polyurethane with blocked NCO groups. Very good potlife and paste stability in coating formulations. Needs temperature of approx. 130°C to activate. Non yellowing.

 

Learn more >
Placeholder

ACRAMIN PREFIX K

ACRAMIN Prefix K is a pretreatment agent for use in the production of fashionable pigment-dyed wash-out articles (garment dyeing).

Short dyeing times
High bath exhaustion (up to 98%) so little pollution of waste water
High colour yield
Better reproducibility
Far less soiling of dyeing units

Learn more >
Aegis® AEM 5772

Aegis® AEM 5772

AEGIS® is based on an antimicrobial technology that’s been proven to be a safe and effective way to eliminate odour-causing bacteria for more than 30 years.

  • The active ingredient in AEGIS® forms a colourless, odourless, positively charged polymer that molecularly bonds to the treated surface.
  • Can be pad applied during the normal manufacturing process.
  • Cationic action eliminates microbes that cause odour, stains and deterioration.
  • Applications include polyester, polyester-blends, fleece, insulation, fiberfill, foam, leather and synthetic leather.
  • Readily breaks down in the environment to basic, naturally occurring materials like water, silicon dioxide (sand) and carbon dioxide.
Learn more >
Aegis® AEM 5772-5

Aegis® AEM 5772-5

AEGIS® is based on an antimicrobial technology that’s been proven to be a safe and effective way to eliminate odour-causing bacteria for more than 30 years.

  • The active ingredient in AEGIS® forms a colourless, odourless, positively charged polymer that molecularly bonds to the treated surface.
  • Can be pad applied during the normal manufacturing process.
  • Cationic action eliminates microbes that cause odour, stains and deterioration.
  • Applications include polyester, polyester-blends, fleece, insulation, fiberfill, foam, leather and synthetic leather.
  • Readily breaks down in the environment to basic, naturally occurring materials like water, silicon dioxide (sand) and carbon dioxide.
Learn more >
BAYGARD CLEAN

BAYGARD CLEAN

A durable, C6 based oil- and water-repellent fluorocarbon resin with excellent results on polyester and very good results on cotton and polyamide. Maintains soft hand. It also imparts excellent stain removability.

 

Learn more >
Placeholder

BAYGARD EDW

A very effective polyurethane dispersion with functional groups to improve the properties and permanency of fluorocarbon finishes on all types of substrates.

 

Learn more >
BAYGARD FBI

BAYGARD FBI

Aliphatic, nonionic booster for the use with fluorocarbons. Optimizes the resistance of water- and oil-repellent finishes to washing and dry-cleaning.

 

Learn more >
Placeholder

BAYGARD WRS

Fluorine free water-repellent agent for synthetic fibers and blends with cellulosic

Imparts excellent water repellent effects
Applies soft touch and smoothness
Very good durability, especially in combination with boosters

Learn more >
BAYPRET NANO-PU

BAYPRET NANO-PU

BAYPRET® NANO-PU is a special self-crosslinking polyether polyurethane, which is dispersed to a droplet size of less then 100 nm. This makes the BAYPRET® NANO-PU a true nano-dispersion. This gives unique application possibilities like special handle modifications, anti-pilling treatments and resin treatment. Furthermore, its unique properties allow the useage of BAYPRET® NANO-PU to upgrade a resin finishing.

High durability and wash-resistance
Lower strength-loss
Softer and more durable handle
Wrinkle free upgrade to more than 20 washes
Much better abrasion resistance

Learn more >
Placeholder

BAYPRET USV

BAYPRET® USV is a self-crosslinking polyether polyurethane polymer which forms a permanent highly elastic film around the fibres. This film is formaldehyde-free. Unlike synthetic resins, BAYPRET® USV does not need a catalyst because it is self-crosslinking. If it is used in combination with synthetic resins these should be crosslinked with weak catalysts such as magnesium chloride or aminohydrochloride. BAYPRET® USV may react to strong catalysts such as zinc nitrate or zinc chloride.

Low formaldehyde
Basic handle is soft and high-bulk
Improves abrasion resistance and rubfastness
Reduces pilling
Fibre-bonding agent

Learn more >
BAYPROTECT AM

BAYPROTECT AM

Permethrin based insect protection agent for outwear, sportswear, military applications on clothing and tents, curtains. The insect proof agent can be applied on all type of fabrics. Permethrin prevents insect bites through the fabric and kills insects that contact the fabric. Highly effective against: o Aedes aegypti (Yellow fever mosquito)
o Anopheles maculatus (Malaria mosquito)
o Anopheles gambiae (Malaria mosquito)
o Anopheles albopictus (Asian tiger mosquito)
o Culex quinquefasciatus (House mosquito)
o Ixodes ricinus (Ticks)
o Talitridae (Sand fly)
o Cimex lectularius (Bed Bug)
o Dermatophagoides pteronyssinus (House dust mite)

High fastness to washing and wear abrasion
Can be eliminated in waste water treatment plants

Not harmful for mammals
Odorless, non-irritating

Learn more >
Placeholder

PROTOREZ FFO 01

Odourless non-formaldehyde resin for the easy-care and wrinkle free finish of cellulosics and their blends with synthetic fibres.

Contains no formaldehyde and does not release any formaldehyde. Gives good fabric performance, without causing the strenght losses as formaldehyde resins. Gives good, supple handle to fabrics. Can be used in pre-cure, post-cure and garment finishing. When used on Tencel, this keeps its peachskin character. Meets the EU-Ecolabel requirements.

Learn more >

Showing 1–16 of 128 results

LATEST FROM OUR BLOG

Consumers are waking up to the importance of sleep

In 2013 the US Government launched its National Healthy Sleep Awareness Project. This was prompted by a growing body of evidence that lack of sleep was costing its economy billions of dollars every year. $411 billion to be precise, according to the RAND Corporation who estimate that figure would be halved if those people sleeping […]

Enhancing the performance of digital inkjet printing on your swimwear

Inkjet printing has been transformational for the swimwear industry. It’s allowed an expansion of collections and a fleetness of foot of which designers and marketers could once only dream. It means fashion houses can keep on trend at higher speed and lower cost, meeting changing demand more precisely. It’s allowed designers to run riot with […]

An expert perspective on creating a bright future for the dyeing industry

With over forty years’ experience in the dyeing business, Harald Gruenewald has built up a level of experience and expertise that is second to none. We interviewed the Business Development Manager of Classical Textiles at Tanatex, to delve into the insights he can share about driving time, cost and environmental efficiencies in this highly competitive […]