Our product range
TANASIL™ BSS
Silicone handle modifier:
- Good penetration to fabric and high affinity
- Good handle modifier providing smooth surface effects
- Suitable for all kind of fibbers especially PES, PES/CV and PES/Co fabrics
- The high concentration provides logistic and cost benefits.
- Outstanding improvement of the sewability
Note: availability outside EU
TANASIL™ CRU
Hydrophilic softener:
- No yellowing
- The good hydrophily makes the finished material suitable for printing or (re-)dyeing
- Highly concentrated; resulting in low packaging and transport costs
- Low storage volumes due to high concentration and therewith lower dosing volumes
- Dosing possible using an automatic dosing system
Note: availability outside EU
TANASIL™ H-FF
Hydrophilic softener:
- Twice as concentrated compared to other products in the market
- Outstanding hydrophility
- Excellent fibre elasticity and shape recovery
- The good water absorbing properties of treated goods make the fabrics easily re-dyable/printable
Note: availability outside EU
TANACARE™ ALOE VERA
Cosmeto-finish, based on microencapsulation, for enriching textiles with the properties of ALOE VERA.
- Skin-care agent for use in cosmetotextiles
- Can be used on fabrics of any kind of fibre
- Does not impair the handle
- Suitable in all main finishing processes
- Preferably applicable in padding
TANACARE™ ARGAN OIL
Cosmeto-finish, based on microencapsulation, for enriching textiles with the properties of ARGAN OIL.
- Skin-care agent for use in cosmetotextiles
- Can be used on fabrics of any kind of fibre
- Does not impair the handle
- Suitable in all main finishing processes
- Preferably applicable in padding
TANAFINISH™ 40119
TANA®FINISH 40119 is an anti-slip finishing agent for all types of fibre that enables anti-pilling and anti-snag finishing.
Silica sol for anti-slip, anti-pilling and anti-snag finishes to improve seam resistance
little impact on handle.
Basically resistant to washing and dry cleaning
TANAFIX™ SRC
Cationic aftertreatment agent to improve wet-fastnesses of dyeing and prints with Direct and Reactive dyes
Formaldehyde-free
Improves the cold-fastnesses such as water severe, washing 40°C and perspiration
Minor impact on the shade
Minor impair on the lightfastness
Applicable in exhaust and continuous process
TANAPAL® SW-LF 01
Low foaming agent for the post treatment of wool, silk and polyamides which have been printed using acid, metal complex and reactive dyes
- Very good dispersal of unfixed dyestuffs and thickeners
- Superb reservation of the printed ground
- A high level of fastness
- Brilliant shades and very good colour contrast
- Very low foaming and can therefore be used in systems with high turbulence
TANAPUR™ VELLUTO
Special polyurethane finishing agent, able to provide unique handle effects and moisture management properties to textiles.
EXCELLENT HANDLE EFFECTS
Creates luxurious, smooth handle effects, improving drape. Excellent choice for raised fabrics, providing a smooth and even appearance.
MOISTURE MANAGEMENT
Due to its hydrophilic character, the treated article has improved moisture absorption and faster evaporation. Providing comfort to the wearer.
TANAPUR™ ONE
Soft and flexible self-crosslinking polyurethane to upgrade the quality of your textiles.
- Fine distribution over and penetration into the fabric
- Yields durable hydrophilic finishes on all fibres
- Improves abrasion resistance
- Suitable in pre-treatment processes to protect the fabric during wet processes
- Is over-dyeable
TASTEX® COOL-EX
Skin-care treatment agent based on micelles, which gives a special cool sensation by the use of dynamic temperature control. The active components consist of xilitol, squalane, silk protein and erythritol.
- Bound water in multi-layer micelle
- Soft handle
- Good affinity to fibre
- Good reproducibility
Showing 33–46 of 46 results